MODEL 7041 FLANGE ADAPTER – ANSI CLASS 125/150
The Model 7041 Flange Adapter allows for a direct connection with ANSI class 125/150 flanges. The specially designed gasket enables the transition from a grooved system to a flanged system or component with this single flange adapter. The two-segment design provides an easy and fast installation. 2” through 12” flange adapters are supplied hinged as a single assembly, while 14” - 24” (Model 7041N) are supplied with two separate segments and a draw kit. All include an EPDM rubber gasket and plated track bolts and nuts. Housing segments are supplied with our standard painted finishes, i.e. orange or RAL3000 red. Optional finishes such as hot dipped zinc galvanized and custom epoxy coatings are available.
MODEL 49 SANDWICH PLATES
The Model #7041, #C341 & #A512 flange adapters require a hard flat surface for effective gasket sealing. A sandwich plate is required and should always be used when the mating surface is not adequate as seen with the serrated faces of some valves or the rubber-faced or rubber-lined flanges of a wafer valve.
MODEL 7041 FLANGE ADAPTER- PN 10 / PN 16
The Model 7041 Flange Adapter allows for a direct connection of PN 10* and PN 16 flanges. The specially designed gasket enables the transition from a grooved system to a flanged system or component with this single flange adapter. The two-segment design provides an easy and fast installation. 2” through 12” (50 mm – 300 mm) flange adapters are supplied hinged as a single assembly, while 14” -24” (Model 7041N) are supplied with two separate segments and a draw kit. All include an EPDM rubber gasket and plated track bolts and nuts. Housing segments are supplied with our standard painted finishes, i.e. orange or RAL3000 red. Optional finishes such as hot dipped zinc galvanized and custom epoxy coatings are available.
MODEL 7041 FLANGE ADAPTER - BS 10-E
The Model 7041 Flange Adapter allows for a direct connection of BS 10 Table E flanges. The specially designed gasket enables the transition from a grooved system to a flanged system or component with this single flange adapter. The two-segment design provides an easy and fast installation. 2” through 12” (50 mm – 300 mm) flange adapters are supplied hinged as a single assembly, while 14” - 24” (Model 7041N) are supplied with two separate segments and a draw kit. All include an EPDM rubber gasket and plated track bolts and nuts. Housing segments are supplied with our standard painted finishes, i.e. orange or RAL3000 red. Optional finishes such as hot dipped zinc galvanized and custom epoxy coatings are available.
MODEL 7043 FLANGE ADAPTER - ANSI CLASS 300
The Model 7043 flange adapter allows for a direct connection with ANSI Class 300 flanges. The specially designed gasket enables the transition from a grooved system to a flanged system or component with this single flange. 2” through 8” Model 7043 flange adapters are supplied hinged as a single assembly, while larger sizes are supplied with separate segments. The Model 7043 flange adapters are comprised of two identical ductile iron segments complete with an EPDM gasket and two pairs of bolts and nuts. The flange segments are painted black.
The Model 7043 flange adapter has been designed with small projections on the outside face of the flange for mating with 1/16” (1.6 mm) raised face flanges. For mating with flat-face flanges these projections must be removed, this can be accomplished with a grinder or other tool.
MODEL 7170 FLANGE ADAPTER
The Model 7170 Flange Adapter provides a rigid transition between ANSI class 125 / 150 flanged components and a grooved system.
Shurjoint standard fitting pressure ratings conform to the ratings of Model 7707 couplings.
MODEL 7181 UNIVERSAL REDUCING FLANGE ADAPTER
The Model 7181 Universal Reducing Flange Adapter provides for a rigid transition between a flanged piping system and a one or two-size reduced grooved system without the use of a concentric reducer. The flange drilling can mate to ANSI 125/150, PN10/16, BS-10E and JIS 10K.
Shurjoint Model 7181 pressure ratings conform to the working pressure of the coupling used to join the system.
Edcos Equipos y Materiales Contra Incendio
Calle Norte 35, No. 895-D
Col. Industrial Vallejo, México, D.F. 02300
(55) 5368-6929
info@equiposymaterialescontraincendio.com
Edcos, Inc. USA
330 Industrial Park
Mercedes,Texas 78570, USA
(956) 565-5660 (70)
(956) 513-0469
sales@edcos.com
No hay comentarios:
Publicar un comentario